WaterBoss 900IF Specifications download pdf (Page 12)

Replenishment Procedure

—

900NF Acid

Neutralizing Filter

The 900NF appliance requires periodic (annual) replenishment of the neutralizing media that adjusts the pH level

of the water. Use the freeboard distance as described in the following section and the diagram to determine the

amount of media needed to adjust the bed depth to maintain optimum performance of the neutralizer.

Tools and Materials Needed

The following tools and materials are needed to replenish the acid neutralizer:

Replenishment Procedure

The replenishment procedure is as follows:

Turn Off the Water

A. Turn off the water to the appliance.

B. Open a tap to depressurize the appliance.

C. Close the tap.

Siphon Off All Water

A. Use the three-quarter-inch socket to

remove the fill plug from the media tank.

B. Insert a siphon hose into the fill port and

siphon off all water down to the media level in

the tank into a five-gallon bucket.

Determine Amount of

Replenishment Media

Required

A. Use a wooden ruler to measure the freeboard distance from the top of the fill plug to the media.

B. The recommended freeboard is 6.5 inches. Add 4.5 lb of media per inch below 6.5 inches.

Example

: Measured Freeboard 8.5 in.

Min

us Factory Freeboard 6.5 in.

Equals Adjusted Freeboard 2.0 in.

Replenishment equals 4.5 lb media X 2.0 in. (adjusted freeboard) = 9 lb media

STEP 1

STEP 2

Media Bed

A dd 9 lb s .

R ec o m m en ded fr eeb o ard

Analog scale (do NOT use a digital scale)

Five-gallon bucket with handle

0.5-inch, four-foot long siphon hose

12-inch wooden ruler (or wooden dowel rod and a

tape measure)

•

Replacement media (P/N M050)

Funnel with one-inch fill tube

Three-quarter-inch socket with ratchet

•

STEP 3

1 2 ... 7 8 9 10 11 12 13

Comments to this Manuals

No comments

WaterBoss 900IF Specifications Page 12

Comments to this Manuals

Related products and manuals for Water dispensers WaterBoss 900IF